shianshooter Posted April 30, 2006 Report Share Posted April 30, 2006 I was lucky enough to recieve 2 manual downriggers from my neighbour. Anyway found this ez-adder item which will allow you to clip another release without raising the downrigger ball. I would think you could clip this on any rigger and release device. Curious if anyone has tried this item before I make a purchase. Any thoughts or feedback would be appreciated. Walker Thanks Link to comment Share on other sites More sharing options...
Guest boston Posted April 30, 2006 Report Share Posted April 30, 2006 scotty makes them as well for dropping a second line in off your cable and running two lines per rigger, it's the one on the bottom of the page. you can get them at pretty much anywhere that sells tackle. cheers boston. http://www.scotty.com/marine/products/prod...ases/index.html Link to comment Share on other sites More sharing options...
Guest FisherNick Posted May 1, 2006 Report Share Posted May 1, 2006 they any good? Link to comment Share on other sites More sharing options...
shianshooter Posted May 3, 2006 Author Report Share Posted May 3, 2006 Hey Boston, Your posting from scotty releases are not be the same as walker. The one walker supplies (ez-adder) will slide down to the cannon ball and not half way like a stacker. The advantage of ez-adder is you can use it for both situations. This product from walker looks good if it works. Especially for guys with manual riggers. Thanks for the reply, I might have to be the ginny pig for this product shianshooter Link to comment Share on other sites More sharing options...
knightfisher Posted May 3, 2006 Report Share Posted May 3, 2006 I've never used downriggers before, so heres a silly question, how do you decide how deep you are suppose to drop them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.