ron4blues Posted December 6, 2012 Report Share Posted December 6, 2012 I mentioned in another thread that I use a method for attaching glass beads for eyes that I find to be very simple. I promised to do the step-by-step, so here it is! Step 1: Cover your hook with thread. Step 2: Wind your thread to the mid-way point of the shank. Step 3: Tie in a short section of light monofilament with 2-3 turns of thread, making sure that the mono runs along the side of the shank. Step 4: Tie in another section of mono on the other side of the shank. Step 5: Wind the thread forward, being careful to keep the sections of mono on their respective sides of the shank. Don't wind the thread closer than 1/8" from the hook eye. Step 6: Thread a single glass bead onto one of the pieces of mono. Step 7: Double the mono back and secure it with 2-3 turns of thread, once again keeping it along the side of the shank. Step 8: Repeat the process on the other side. Step 9: Secure with a few figure-eight turns then wind your thread back to the 1/2 way point then trim off the excess mono. Step 10: Finish tying your fly. Link to comment Share on other sites More sharing options...
Gnfshn Posted December 6, 2012 Report Share Posted December 6, 2012 Nice - good clear photos too. Link to comment Share on other sites More sharing options...
Snakeyes Posted December 12, 2012 Report Share Posted December 12, 2012 nice post and pics THANK YOU!!!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.